Press Releases

Mohawk's System-1 model is a two post lift with a 10,000 lb. lifting capacity. The System-1 clear floor lift incorporates Mohawk's patented hydraulic synchronization system. The System-1 lift is ideal for servicing all cars and light trucks.

The System-1 features a low 3 ½" swing arm height allowing easy access to the lowest riding sports cars. Mohawk's System-1 lift design features adjustable height overhead lines (optional underground lines available) and all-position mechanical and hydraulic safeties. Standard equipment includes; 3" and 6" truck frame adaptors for hard to reach vehicle frames and automatic swing arm restraints assure vehicle security and safety.

All Mohawk Lifts are designed and manufactured in the USA. Mohawk's System-1 lift is ALI/ETL certified to meet the one and only National Safety Standard for garage lifts. Mohawk's System-1 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty. For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY 12010.

Mohawk lifts of Amsterdam, NY a leading manufacturer of automotive service lifts announces an update of the model System I.

The 10,000 lb capacity, clear floor lift, System I incorporates Mohawk’s patented hydraulic synchronization. The System I is ideal for servicing all cars and light trucks. The System I features a low 3 1/2” arm height allowing easy access to the lowest riding sports cars, total clear floor design with adjustable height overhead hydraulic lines, all position mechanical and hydraulic safeties, and automatic swing arm restraints.

Standard equipment includes truck and van adaptors. The System I lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk’s System-1 model is a two post lift with a 10,000 lb. lifting capacity.  The System-1 clear floor lift incorporates Mohawk’s patented hydraulic synchronization system.  The System-1 lift is ideal for servicing all cars and light trucks. 

The System-1 features a low 3 ½” swing arm height allowing easy access to the lowest riding sports cars.  Mohawk’s System-1 lift design features adjustable height overhead lines (optional underground lines available) and all-position mechanical and hydraulic safeties.  Standard equipment includes; 3” and 6” truck frame adaptors for hard to reach vehicle frames and automatic swing arm restraints assure vehicle security and safety. 

All Mohawk Lifts are designed and manufactured in the USA.  Mohawk’s System-1 lift is ALI/ETL certified to meet the one and only National Safety Standard for garage lifts.  Mohawk’s System-1 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty.  For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY  12010.

Mohawk lifts of Amsterdam, NY a leading manufacturer of automotive service lifts announces an update of the model System I.



The 10,000 lb capacity, clear floor lift, System I incorporates Mohawk’s patented hydraulic synchronization. The System I is ideal for servicing all cars and light trucks. The System I features a low 3 1/2” arm height allowing easy access to the lowest riding sports cars, total clear floor design with adjustable height overhead hydraulic lines, all position mechanical and hydraulic safeties, and automatic swing arm restraints.



Standard equipment includes truck and van adaptors. The System I lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty.

For more information please contact Mohawk Lifts by phone at 800-833-2006, by mail at P.O Box 110 Amsterdam, N.Y 12010, or visit our website at www.mohawklifts.com.

Mohawk’s A-7 model is an asymmetric two post lift with a 7,000 lb. lifting capacity.  This asymmetric design allows Mohawk’s A-7 lift to fit in narrow 10’ wide bays while all vehicle doors are fully opened. 

The A-7 features a clear floor work area designed for free and easy access around your shop.  The A-7 offers height adjustable overhead steel hydraulic lines to easily fit your shop’s ceiling height or optional underground lines.  The A-7 lift is equipped with Mohawk’s patented hydraulic synchronization system and infinite position mechanical locks which are backed by redundant hydraulic safety systems.  Standard features of the A-7 include; low 3 ½” swing arms for access under the lowest riding sports cars, and both 3” and 6” truck frame adaptors for hard to reach vehicle frames.  Automatic swing arm restraints assure vehicle security and safety. 

All Mohawk Lifts are designed and manufactured in the USA.  Mohawk’s A-7 lift is ALI/ETL certified to meet the one and only National Safety Standard for garage lifts.  Mohawk’s A-7 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty.  For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY  12010.

Mohawk Lifts introduces an updated flyer on the Mohawk A-7 two post vehicle lift. Mohawks A-7 lift flyer shows the lift and all features with comparative photos of other lift brands.

Mohawk’s A-7 lifts are made in the USA and are ALI/ETL certified to meet the one and only national safety standard for vehicle lifts.

For more information please contact Mohawk Lifts by phone at 800-833-2006, by mail at P.O Box 110 Amsterdam, N.Y 12010, or visit our website at www.mohawklifts.com.

Mohawk's LMF-12 is a clear floor above ground lift, capable of raising light and medium duty vehicles up to 12,000 lbs. The LMF-12 is a twin cylinder direct drive design using no chains or cables.

The LMF-12 features adjustable height overhead hydraulic lines (optional underground lines available), a total drive-thru design and Mohawk's all-position mechanical and hydraulic safeties. The LMF-12 also comes with 5", 7 ½" and 10" frame adaptors as standard equipment and features the Mohawk patented hydraulic equalization system.

All Mohawk Lifts are designed and manufactured in the USA. Mohawk's LMF-12 lift is ALI/ETL certified to meet the one and only National Safety Standard for garage lifts. Mohawk's LMF-12 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty. For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY 12010.

Mohawk's TP-16 is a clear floor above ground lift capable of raising medium duty vehicles up to 16,000 lbs. The TP-16 electric/hydraulic lift features Mohawk's all-position mechanical and hydraulic safeties, total drive-thru design, automatic swing arm restraints and height adjustable overhead hydraulic lines (optional underground lines available).

The TP-16 has a twin cylinder direct drive design using no chains or cables. Standard equipment includes 5", 7 ½" and 10" frame adaptors and features the Mohawk patented hydraulic equalization system.

All Mohawk Lifts are designed and manufactured in the USA. Mohawk's TP-16 lift is ALI/ETL certified to meet the one and only National Safety Standard for garage lifts. Mohawk's TP-16 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty. For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY 12010.

Mohawk’s LMF-12 is a clear floor above ground lift, capable of raising light and medium duty vehicles up to 12,000 lbs.  The LMF-12 is a twin cylinder direct drive design using no chains or cables. 

The LMF-12 features adjustable height overhead hydraulic lines (optional underground lines available), a total drive-thru design and Mohawk’s all-position mechanical and hydraulic safeties.  The LMF-12 also comes with 5”, 7 ½” and 10” frame adaptors as standard equipment and features the Mohawk patented hydraulic equalization system.

All Mohawk Lifts are designed and manufactured in the USA.  Mohawk’s LMF-12 lift is ALI/ETL certified to meet the one and only National Safety Standard for garage lifts.  Mohawk’s LMF-12 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty.  For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY  12010.

Mohawk’s TP-16 is a clear floor above ground lift capable of raising medium duty vehicles up to 16,000 lbs.  The TP-16 electric/hydraulic lift features Mohawk’s all-position mechanical and hydraulic safeties, total drive-thru design, automatic swing arm restraints and height adjustable overhead hydraulic lines (optional underground lines available). 

The TP-16 has a twin cylinder direct drive design using no chains or cables.  Standard equipment includes 5”, 7 ½” and 10” frame adaptors and features the Mohawk patented hydraulic equalization system.

All Mohawk Lifts are designed and manufactured in the USA.  Mohawk’s TP-16 lift is ALI/ETL certified to meet the one and only National Safety Standard for garage lifts.  Mohawk’s TP-16 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty.  For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY  12010. 

Mohawk's TP-20 is a clear floor above ground lift capable of raising all single axle fleet vehicles up to 20,000 lbs.

Mohawk's TP-20 lift uses double telescoping three stage swing arms and slider combination, has a clear floor design and adjustable height overhead hydraulic lines for ultimate flexibility (optional underground lines available). Standard equipment includes 5", 7 ½" and 10" stacking truck adaptors to reach truck frames and get around fuel tanks or tool boxes. Safety systems include; all position mechanical safety locks (begin engaging at 5" and continue ever 6" through the full lifting height), electric and hydraulic synchronization systems, pressure compensated flow valve control and velocity fuse valving.

All Mohawk Lifts are designed and manufactured in the USA. Mohawk's TP-20 lift is ALI/ETL certified to meet the one and only National Safety Standard for garage lifts. Mohawk's TP-20 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty. For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY 12010.

Mohawk’s TP-20 is a clear floor above ground lift capable of raising all single axle fleet vehicles up to 20,000 lbs. 

Mohawk’s TP-20 lift uses double telescoping three stage swing arms and slider combination, has a clear floor design and adjustable height overhead hydraulic lines for ultimate flexibility (optional underground lines available).  Standard equipment includes 5”, 7 ½” and 10” stacking truck adaptors to reach truck frames and get around fuel tanks or tool boxes.  Safety systems include; all position mechanical safety locks (begin engaging at 5” and continue ever 6” through the full lifting height), electric and hydraulic synchronization systems, pressure compensated flow valve control and velocity fuse valving. 

All Mohawk Lifts are designed and manufactured in the USA.  Mohawk’s TP-20 lift is ALI/ETL certified to meet the one and only National Safety Standard for garage lifts.  Mohawk’s TP-20 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty.  For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY  12010. 

Amsterdam, NY Mohawk resources ltd. The nations leading manufacturer of heavy duty surface mounted lifts announces the newest addition to the product line, the 18,000 lb capacity model TP-18 and the 26,000 lb. Capacity TP-26.

The TP-18 and TP-26 are the first, two post, frame contact lifts made to suit the needs of heavy duty fleets, with an above ground style lift. Installation of the lifts consists of just bolting the lifts columns to the concrete floor of the shop, and is completed in just 5 hours. With a full six foot lifting height, the TP-18 and TP-26 models offer infinite position mechanical locking safeties in both columns, backed by mohawks patented hydraulic locking system.

Surface mounted design and operation of the TP-18 and TP-26 avoids the environmental liabilities associated with in ground lifts. Clear floor work area between the lifting columns allows tool boxes and shop equipment to easily roll around the shop.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Thanks for your inquiry on MOHAWK’S heavy duty TP-20/26/30 two-post, clear floor lifts. Enclosed you will find a brochure on the TP-20/26/30 and our most popular two-post, clear floor, 9,000 lb. capacity System I.

MOHAWK has two-post models available in capacities form 7,000 lbs. up to 30,000 lbs. and for heavier vehicle service, four-posts models from 10,000 lbs. to 200,000 lbs. and higher. The fully mobile MP series lifts are also available from 12,000 lb. to 300,000 lb. capacity.

The TP-20/26/30 is a heavy duty, two-post; clears floor lift available in 20,000, 26,000 or 30,000 lb. capacity. The heavy-duty TP lifts are hydraulically equalized, using a pair of overhead, or optional in-ground hydraulic lines, height adjustable for all types of trucks and utility vehicles up to class 6. The TP-20/26/30 has 5” low profile, double telescoping arm that allow access under all passenger cars. The state of the art safety systems include, dual, all position mechanical safety locks, MOHAWK’S patented hydraulic safety system, velocity fuses, and pressure compensated flow control valving. Automatic locking arm restraints engage from the moment the lift starts to rise. The column of these lifts are constructed of 1” thick fork lift mast, while both carriages ride on sixteen 4” double sealed, self lubricating STEEL rollers for a long service lift.

MOHAWK makes the best-built automotive lift of any company in the world. Our lifts are designed to be rugged and rigid even when they are fully loaded. We incorporate maintenance free designs at every possible opportunity and we build our products to have the lowest possible cost over their very long life. WE DESIGN LIFTS FOR ZERO DOWNTIME. Then, we back it up with the industry’s longest most inclusive warranty. When you build the best lift you offer the best guarantee because at MOHAWK we build lifts to last a lifetime. Call our staff now and we will explain the differences between MOHAWK and “all the rest.”

Mohawk’s TP 26 was the first two post frame contact lift made to suit the needs of heavy duty fleets.   The TP 26 is an above ground clear floor style lift with a full six foot lifting height and 26,000 lb. lifting capacity. 

The TP 26/30 lifts are both heavy duty lifts, clear floor designs with either a 26,000 or 30,000 lb. lifting capacity.  These heavy duty two post lifts are hydraulically equalized, using a pair of height adjustable overhead hydraulic lines for all types of trucks and utility vehicles (optional underground lines available).  The TP 26/30 lift has a 5” low profile, double telescoping arms that allow access under all passenger cars.  Standard equipment includes 5”, 7 ½” and 10” stacking truck adaptors. 

The state of the art safety systems include; dual all position mechanical safety locks, Mohawk’s patented hydraulic system, hand-held pendant control to raise or lower the lift, velocity fuses and pressure compensated flow valve control.  Automatic locking swing arm restraints engage from the moment the lifts start to rise. 

All Mohawk Lifts are designed and manufactured in the USA.  Mohawk’s TP-26/30 lift is ALI/ETL certified to meet the one and only National Safety Standard for garage lifts.  Mohawk’s TP-26/30 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty.  For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY  12010. 

Mohawk lifts introduces the model TR-19 with a capacity rating of 19,000 lbs. The TR-19 will accommodate all passenger cars trucks, utility vehicles, small R.V.’s. The TR-19 offers a full 6’ of unrestricted undervehicle access. Equipped with 20' runways,&available "wheels free" rolling jacks to raise the tires off the tracks for wheel, brake and axle service.

Powered by a 2 h.p. Electric motor and pump, TR-19 safeties include infinite position mechanical locking wedge, Mohawks patented hydraulic safety systems, leaf chain synchronization and redundant electronic controls. The TR-19 is easily installed in 4 to 6 hours. The surface mounted design avoids all the environmental liabilities associated with below ground lifts.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk lifts model TR-25 has a capacity rating of 25,000 lbs. The TR-25 will accommodate trucks, buses, utility vehicles, and all passenger cars. The TR-25 offers a full 6’ of unrestricted undervehicle access.

Equipped with 20' to 35' runways, with available equipment including "wheels free" rolling jacks to raise the tires off the tracks for wheel, brake and axle service. Powered by a 2 h.p. Electric motor and pump, TR-25 safeties include infinite position mechanical locking wedge, Mohawks patented hydraulic safety systems, leaf chain synchronization and redundant electronic controls.

The TR-25 is easily installed in just six hours. The surface mounted design avoids all the environmental liabilities associated with below ground lifts.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk lifts model TR-25 has a capacity rating of 25,000 lbs. The TR-25 will accommodate trucks, buses, utility vehicles, and all passenger cars. The TR-25 offers a full 6’ of unrestricted undervehicle access.

Equipped with 20' to 35' runways, with available equipment including "wheels free" rolling jacks to raise the tires off the tracks for wheel, brake and axle service. Powered by a 2 h.p. electric motor and pump, TR-25 safeties include infinite position mechanical locking wedge, Mohawks patented hydraulic safety systems, leaf chain synchronization and redundant electronic controls.

The TR-25 is easily installed in just six hours.

Mohawk’s TR 19/25 series lifts are made in the USA and  the surface mounted design avoids all the environmental liabilities associated with below ground lifts.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Rated at 25,000 Lb. Capacity, this six foot rise lift offers full under-carriage access for servicing fork lifts.

The mohawk fl-25 lift is surface mounted and installs in Just hours by bolting to the shops concrete floor. Adjustable Lifting runways accommodate fork lifts of any wheelbase width As well as length. Also available is an attachment to service All types of three wheel fork lifts.

Other options for the lift include “wheels free” rolling Hydraulic jacks, lighted runways, oil drain pan attachment, and the ability to lengthen the runways for servicing any Cars, trucks or buses.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

With a per column capacity rating of 12,000 to 40,000 lbs. Per post, the MP series lifts range from 24,000 to 320,000 lbs. Easily positioned by one person, the MP series lifts can turn any flat area into a productive work bay.

The Mohawk MP lifts electric/hydraulic assures steady&smooth lifting of all vehicles including passenger cars. Hydraulic operation means no acme or mechanical screw systems to wear, maintain & replace. Each column can be independently operated, or each can control all four six or eight posts.

Safety systems include electric & hydraulic synchronization systems, pressure compensated flow control & velocity fuse valving & all position mechanical safety locks.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk Lifts introduces a new design in mobile column lifts the DW series. The DW designation is Mohawk DOUBLE WIDE mobile column lift. The DW lift is the first mobile column lift made where 4 columns can do the work of 6 columns. The lift is designed to lift BOTH axles of a tandem rear axle vehicle. The DW column cost considerably less than would 6 columns of a normal mobile lift.

With various lifting capacities, the DW mobile lift has four adjustable width lifting forks to accommodate any tandem axle vehicle. When using the DW column on a single axle rear end, the DW mobile lifts adjustable forks grab the vehicle in the center of the column as a normal mobile lift would.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk Lift’s mobile column lifts are available in two through eight column sets in capacities ranging from 18,000 lbs to 240,000 lbs. Available with Mohawk’s auto-frame adaptor, Mohawk’s columns can be used to raise a passenger vehicle from the side while leaving the tires free for wheel, brake, and front end service

Mohawk’s mobile column lifts are ALI/ETL certified to meet the one and only nationally recognized safety standard for vehicle lifts. Mohawk’s mobile column lifts are available in either 220 or 440 AC or 24 Volt DC current.

For additional information please visit www.mohawklifts.com,call 1-800-833-2006, fax us at 518-842-1289 , or write us at PO Box 110 Amsterdam, New York 12010.

Mohawk Lifts introduces an updated flyer on the Mohawk MP Series vehicle lift. Mohawks mobile column lift flyer shows the lift and all features with comparative photos of other lift brands.

Mohawk’s MP series lifts are made in the USA and are ALI/ETL certified to meet the one and only national safety standard for vehicle lifts.

For more information please contact Mohawk Lifts by phone at 800-833-2006, by mail at P.O Box 110 Amsterdam, N.Y 12010, or visit our website at www.mohawklifts.com.

Amsterdam, NY 12010 presents the Mobile Column lift. The Mohawk mobile column lifts are available in 2, 4, 6, or 8 column sets with capacities up to 240,000 lbs. For the RV service, Mohawk Lifts can be used with the sliding rooms extended outward with the optional RV slide out adaptor. Mohawk Lifts are manufactured in the USA and available in AC (plug in) or DC (battery powered) versions of the mobile column.

CONTACT
www.mohawklifts.com 800-833-2006

Mohawk Lifts introduces the USL-6000. The universal scissors lift (USL-6000) is a 6,000 lb. capacity full rise, no-post, portable lift giving shops full side&under-vehicle access. The USL-6000 features all the benefits of low & mid-rise lifts but also gives full 6’ lifting height for approximately the same price.

The space saving design of the USL-6000 takes up no more shop space than a small car. With safety locks at all lifting heights, the USL-6000 locks at any lifting height for any type of vehicle service or body work, by bringing the vehicle to a comfortable working height. The portable USL-6000 lift operates on either 220 or 110 volt power, and is moved by one person

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk Resources offers a range of parallelogram lifts with capacity ranges from 36,000 to 100,000 lb. capacities, track lengths from as short as 26' to 48' longs and all models are available in either surface mounted, or flush mount design to be level with the shops floor when fully lowered.

Available with rolling air jacks the full length of the runways, florescent lights to illuminate the vehicle undercarriage, and a specialized tire dolly to remove heavy tires the Mohawk parallelograms install in just hours based on the continuous based design which adds strength to the lifts design, and removes stress from the anchoring system

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk lifts introduces high-rise tire dolly. The TD-1000 tire dolly is a 1,000 lb. capacity tire dolly, able to raise full sized dually tires a full 48” for tire removal&installation with all heavy duty truck tires in conjunction with any truck lift.

The winch operated design incorporates a side-shifting ability of the lifting rollers allowing easier alignments of the tire to the bolt pattern, rollers on the lifting forks to rotate the tire to the bolt pattern and hydraulically tilting forks to assist in lug nut realignment.


Built to pald safety standards, the TD-1000 wheel dolly includes a safety chain when moving the dolly, four position swivel casters & easy grab hand grips

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Adaptor makes frame engaging lift into tire engaging lift Mohawk lifts introduces the wa-1&wa-12 wheel adaptor. By quickly changing from frame contact to wheel contact,the Mohawk adaptors make lifting vehicles easier, safer & faster by speeding up the "set-up" time of frame contact lifts.

The WA-1 & WA-12 adaptors fit all Mohawk 9,000, 12,000 and 15,000 lb. capacity two post frame contact lifts. The adaptors are quickly bolted onto the lifts swing arm, or remove just as quickly to revert to a typical frame contact lifts for when "wheels-free" service is required.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawks TL-7 two post, turf lift is a 7,000 lb. capacity lift made specifically for various types of turf maintenance equipment. Equipped with adjustable lifting forks to accomodate all ranges of wheelbases, the lift forks also expand and contract to handle different size tires. The rear of the vehicle is riased with the wheels in a trough which gives the Mohawk TL-7 turf lift the flexibility to accomodate so many different pieces of equipment.

Offering a full 6' lifting height, twin safety locking systems&hydraulic locking safties. The TL-7 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk Resources (Amsterdam, NY) introduces the model TL-7. The TL-7 is a 7,000 lb. capacity turf maintenance lift. Designed for a variety of vehicles from turf equipment, to bobcats the TL-7 will also accommodate passenger vehicles.

Built on the same frame as the Mohawk SYSTEM I --10,000 lb. capacity two post automotive lift, the TL-7 replaces the normal automotive swing arms&adaptors with a combination of a stationary rear trough (to accommodate 3 wheel vehicles) and a pair of multi-axis, adjustable width, sliding forks. These sliding forks are able to grab any size tire whether it be from a very small lawn mover to the 17” rim of a 1 ton passenger truck.

Side to side synchronization is accomplished through Mohawks patented hydraulic fluid displacement system, which allows the overhead hydraulic lines to routed taller to fit any shop ceiling, or routed in-floor. Mohawks TL-7 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk's SLT-2000 is a 2,000 lb. capacity scissor lifting table made to remove or install large transmissions, rear ends or differentials. The SLT platform is 4' long by 2' wide and has anchoring points to safety secure the loads being lifted. Ideal for use in the Heavy Duty garages, the SLT-2000 operates on a 110 volt power unit to hydraulically raise the load. Minimum lifting height is 3', with full height being 8' tall for access under the tallest vehicles, or the highest lifts (or pits) on the marketplace. Safety systems include 12 position mechanical locks, and hydraulic safeties consisting of velocity fuses and pressure compensated flow control valving.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk Lifts SPEEDLANE is a drive on adaptor for a two post lift to quickly convert the frame engaging swing arm lift into a drive on pad lift to leave the wheels hanging free for tire, brake and undervehicle service work. Made of lightweight aluminum the 90 lb. SPEEDLANE fits into place or is removed in just seconds per side.The SPEEDLANE does not reduce the capacity of the lift it is being used on. The SPEEDLANE eliminates the set up time of using a two post lifts swing arms essentially changing the swing arm lift into a wheels free ramp lift (and back again).

The SPEEDLANE works on all Mohawk 9,000, 10,000 12,000 and 15,000 lb. capacity twin post lifts.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk lifts SPEEDLANE drive on adaptor is available for 9,000 to 16,000 capacity 2 post lifts. Mohawk Lifts SPEEDLANE is a drive on adaptor for a two post lift to quickly convert the frame engaging swing arm lift into a drive on pad lift to leave the wheels hanging free for tire, brake, and under vehicle service work. The SPEEDLANE can be added or removed in 10 seconds and it is an ALI/ETL certified option.

For additional information please visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk's weight gauge is a scale on the lift and is available for all Mohawk two post lifts from 7,000 to 30,000 lb. capacities. The weight gauge serves many purposes in a shop...

1. the weight gauge is a diagnostic tool. Should customers complain of poor mileage or short brake pad life, knowing the actual weight of the vehicle will assist techs.
2. the weight gauge will show no weight when the tech is properly using the lift and lowering the vehicle on to the lift's mechanical safety locks.
3. to assist in selling better brakes, heavier duty brakes or tires with higher load ratings, customers with work trucks or SUV's can be shown actual weight to justify higher dollar parts installations.
4. the weight gauge will verify that the lift is not being overloaded.

For more information visit www.mohawklifts.com, call Mohawk Lifts at 1-800-833-2006 or write to Mohawk Lifts at PO Box 110 Amsterdam, NY 12010.

Mohawk Lifts has announced the certification of their low, medium, and full height Mobile Jacks Stands, which have been ETL certified to pass ANSI/PALD standards. All Mohawk Lifts are designed and manufactured in the USA.

Mohawk’s jack stands are PALD certified to meet the one and only National Safety Standard for garage lifts.

They are available in adjustable heights of 47-72”, 30-47” and 18-30”. 

All Mohawk Jack Stands come in either 18,000 or 24,000 lb capacities and are available with rubber topped flat pads or U-shaped axle engaging heads.

All offer an additional 7” of fine thread adjustment.

For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110 Amsterdam, NY 12010.

Mohawk's A-7 model is an asymmetric two post lift with a 7,000 lb. lifting capacity. This asymmetric design allows Mohawk's A-7 lift to fit in narrow 10' wide bays while all vehicle doors are fully opened.

The A-7 features a clear floor work area designed for free and easy access around your shop. The A-7 offers height adjustable overhead steel hydraulic lines to easily fit your shop's ceiling height or optional underground lines. The A-7 lift is equipped with Mohawk's patented hydraulic synchronization system and infinite position mechanical locks which are backed by redundant hydraulic safety systems. Standard features of the A-7 include; low 3 ½" swing arms for access under the lowest riding sports cars, and both 3" and 6" truck frame adaptors for hard to reach vehicle frames. Automatic swing arm restraints assure vehicle security and safety.

All Mohawk Lifts are designed and manufactured in the USA. Mohawk's A-7 lift is ALI/ETL certified to meet the one and only National Safety Standard for garage lifts. Mohawk's A-7 lift comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty. For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY 12010.

The HR-6 is a portable lift, easily moved from bay to bay, and operates with 110-volt electric or hydraulic power.

The HR-6 gives full 360-degree access around the lift. Perfect for tire, brake and body shop work. The HR-6 lift is operated on any level surface without being bolted down.

The HR-6 operates with tow hydraulic cylinders, multiple position mechanical safety locks and hydraulic safely systems.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

All Frame Contact Lifts Must Have A System To Accommodate Lifting Of Low Riding Passenger Cars, As Well As High Frame Trucks, Vans&Sport Utility Vehicles (Suv’s). There Are Three Different Styles Of Arm/Arm Adaptors Used In The Lift Industry To Accommodate All Vehicles.

The First Style Is The Multi-Position Flip-Up Pad Generally Associated With In-Ground Lifts. The Advantage Here Is It Is A Self-Contained Unit. The Disadvantage Of This Style Are:

The High Height For Access Under Low Riding Cars, The Set Up Time To Properly Position The Pads, The Small Surface Area Of Contact Lessens The Stability, And Frequently These Flip Pads Don’t Go High Enough For Some High Frame Vehicles. This Final Disadvantage Can Be Overcome By Purchasing Optional Pad Extenders.

The Second Style Is The Screw Adjustment Lifting Pad. Advantages Of Screw Pads Are They Are Self Contained, And Give A Large Stable Surface Area Contacting The Vehicle. The Disadvantages Are; Screw Pads When Fully Extended Still Don’t Reach All Truck Frames Requiring Optional Extenders, A High Profile When Fully Lowered And Finally A Shop That Must Change The Height Of These Pads Just 3 Times Per Day Between Cars And Trucks, Based On A $40 Shop Rate Will Waste $2000 A Year In Lost Repair Time & Productivity Costs.

Finally The Third Style “Quick-Connect” Stacking Adaptor System Offers Infinite Height Adjustment For High Frame Trucks, Are Easily Positioned, Offer A Large Frame Contact Area, Take Less Than 30 Seconds To Change The Lifting Height Between Cars & Trucks, And Is Low Enough For All Low Riding Cars.

Blind Note To Editorial Dept. $2000/Year Saving Based On #1 Changing The Heights 3x/Day (Which Isn’t Much) =15 Minutes #2 $40 Shop Rate #3 200 Working Days/Year Therefore--- 15 Minutes/Day X $40 Shop Rate = $10 Day--- $10/Day X 200 Days Per Year =$2000.

The Above Scenario Is Not Mohawk Lift Specific, And Several Lift Companies Use The Same Time Saving Quick Connect Adaptor System That Mohawk Does. Therefore Nobody Can Give You Grief For Picking Up The Above Release Or Being Biased.

Mohawk four post lifts range in capacity from 19,000 to 75,000 lb capacities. The model TR-50 (shown) is a 50,000 lb. Capacity lift able to accommodate all trucks, loaders, street Sweepers&all equipment found in public works garages Including passenger vehicles.

The mohawk TR-33 thru TR-75 models are all capable of raising All types of public works vehicles including winged snow plow Trucks, loaders, buses & all regular type passenger vehicles. Mohawk lifts feature the most under-vehicle access available For all types of repairs & p.m.'s. And are available with Rolling "wheels-free" jacks to raise the tires off the tracks for tire & axle service.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

The new Mohawk 12,000 lb general service, 4-post lift offers many standard features available only as options on other brands. Features such as no maintenance pre-stretched PFV cables, 14 level working positions on safety ladders located within each post, single point safety release for easy lowering, 3 individual safety systems, hydraulic flow control - spring loaded dead drop safety dog - spring loaded, always engaged safety shoes in each post, fenner power pack with pressure relief valve to prevent overloading the lift, air filter lubricator to clean - dry - and lubricate the air supply to the safety shoes and any air tools, heavy duty all steel construction with built-in jack rails for 6,000 lb jacking beam.

Mohawk jacking beams include OTC air/hydraulic pumps for long life and reduced maintenance. The new Mohawk 4-post 12,000 lb lift comes complete with a 5-year warranty on the structural components, a 3-year warranty on the cables, and a 1-year warranty on all other components.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Mohawk’s slope indicator is a tool for the AC and DC Mobile Column Lifts.  Since the mobile column lifts can be moved and placed anywhere in or outside of your shop, we have designed this tool for your safety.  You simply place it on your mobile column and it will indicate the floor slope in degrees.  Mohawk’s mobile columns can be used safely up to a 3 degree floor slope.  Mohawk’s slope indicator ensures the safety of the lift, vehicle and most importantly the techs from a potentially unsafe work environment.

All Mohawk Lifts are proudly designed, welded and manufactured in the USA.    For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY  12010. 

Mohawk’s two post lifts range in capacity from 7,000-30,000 lbs.  They come in the following capacities; 7,000 lbs., 10,000 lbs., 12,000 lbs., 16,000 lbs., 20,000 lbs., 26,000 lbs. and 30,000 lbs. 

The two post lifts range from light duty to medium duty lifting.  The two post lifts are capable of raising passenger cars to utility trucks.  The two post lifts have both an asymmetric model and symmetric models. 

All of Mohawk Lifts are designed and manufactured in the USA.  All of Mohawk’s two post lifts are ALI/ETL certified to meet the one and only National Safety Standard for garage lifts.  Mohawk’s two post lifts comes with a 25 year structural, 10 year mechanical, plus a limited lifetime hydraulic cylinder warranty.  For more information please visit www.mohawklifts.com, call 1-800-833-2006, fax 518-842-1289, or write to P.O. Box 110, Amsterdam, NY  12010. 

Mohawk’s weight gauge is a scale on the lift and is available for all Mohawk two post lifts from 7,000 to 30,000 lb. capacities.  The weight gauge serves many purposes in a shop…

1. the weight gauge is a diagnostic tool.  Should customers complain of poor mileage or short brake pad life, knowing the actual weight of the vehicle will assist techs.
2. the weight gauge will show no weight when the tech is properly using the lift and lowering the vehicle on to the lift’s mechanical safety locks.
3. To assist in selling better brakes, heavier duty brakes or tires with higher load ratings, customers with work trucks or SUV’s can be shown actual weight to justify higher dollar parts installations.
4. the weight gauge will verify that the lift is not being overloaded.

For more information visit www.mohawklifts.com, call Mohawk Lifts at 1-800-833-2006 or write to Mohawk Lifts at PO Box 110 Amsterdam, NY 12010.

All Mohawk 2 Post Lifts now carry a 25 year structural warranty. This will cover the columns, carriages, and swing arms.

Established in 1981, no Mohawk two post lift user has yet to “wear out” a Mohawk lift. Mohawk is the only lift company who manufactures their lifts to last forever. “We made our warranty like our lifts because we know a shop can’t wear out a Mohawk lift” said company president Rick Wells.

For more information please contact Mohawk lifts by phone at 800-833-2006, by mail at P.O Box 110 Amsterdam, N.Y 12010, or visit our website at www.mohawklifts.com.

Mohawk Lifts introduces height adjustable screw type lift pads. Mohawk’s adjustable screw pads are available for all 7,000 to 20,000 lb capacity two-post vehicle lifts. The adjustable screw pads are available in rubber or steal top pads and give an additional 3+” of fine pad adjustment.

For more information please contact Mohawk Lifts by phone at 800-833-2006, by mail at P.O Box 110 Amsterdam, N.Y 12010, or visit our website at www.mohawklifts.com.