ST-2000N Scissor Transmission Jack

Lift Classification:
Scissor Transmission Jack

Lifting Capacity:
2,000 lbs

Read the Press Release:

Mohawk Lifts Introduces the SLT-2000 Scissor Lift Table

Mohawk's SLT-2000 is a 2,000 lb. capacity scissor lifting table made to remove or install large transmissions, rear ends or differentials. The SLT platform is 4' long by 2' wide and has anchoring points to safety secure the loads being lifted. Ideal for use in the Heavy Duty garages, the SLT-2000 operates on a 110 volt power unit to hydraulically raise the load. Minimum lifting height is 3', with full height being 8' tall for access under the tallest vehicles, or the highest lifts (or pits) on the marketplace. Safety systems include 12 position mechanical locks, and hydraulic safeties consisting of velocity fuses and pressure compensated flow control valving.

For additional information visit www.mohawklifts.com or call 1-800-833-2006, or fax us at 518-842-1289. Write us at PO Box 110, Amsterdam, New York 12010.

Close this window

ST-2000N Photo Gallery

Instructions for downloading photos

About our photos

Most photos are available in both low- and high-resolution versions. Low-resolution images are suitable for use on the web, or for print projects where the image size will be relatively small. High-resolution photos are best for glossy color printing – brochures, magazine ads, data sheets.

To get a better look before you download, click on the thumnail or the "Low Resolution" link to open the low-res version of the image.

To download

Simply click on either the "High Resolution" or on the image thumbnail link and right-click (or control-click on a Mac) on the image then select "Download Link to Disk." You can also click, hold and drag the image onto your desktop.

Close this window

High Resolution